The specific installation method is as follows 1. Place […]
The specific installation method is as follows
1. Place the heads of the four screw rods into the hole of the back cover of the lamp body;
2. Slide the four screws to the small panel light hole and make sure that the swash plate is stuck in the cover;
3. Align the hole position of the power supply structure with the four screws. If there is any misalignment, move it slightly;
4. Screw the nut and the screw to fix the power supply to the panel light box;
5. Connect the plug-type structure of the power output end to the plug-type card position inside the box, and insert it with it.
6. Insert the lamp body into the ceiling, connect the plug to the power supply, turn on the LED light switch, and turn on the panel light.